Char.
|
Our products
|
Amount of
carbon fiber
used
|
●Weaving widths up to 600mm can be a one-time heating pad, the product even
heating, the appearance of smooth appearance.
|
Carbon fiber
heating pad
electrode tape
|
●Woven belt with electrodes so that good contact with the carbon fiber shaft to
increase the service life of heating pad
|
Press-fit
technoloty
|
●Special copper-belt equipments,instead of normal soldering technology,
are used more reliable
|
Adhesive glue
|
●Special high/low temperature resistant glue is used,special equipments are
used to glue
●Conformance with automobile industry QC/T413 standard
|
Sleeves of
conductors
|
●Harness with self-produced PVC pipe, wire and using German standard
and reliable marking on environmental protection
|
Thin film pressure
sensor of human
body
|
●Function:the circuit is completed only if the sensor is under the pressures
of over 25kg(55 Ib),no matter the swith is on or off,to avoid the pad idle
heating when nobody on the seat and safety peril.
●The life time of the pressure senor,over 1 millon times,the working temperature:
-40℃(-40 F) ~120℃(248 F)
●With autonomous intellectual proerty right
●All products can be installed with such function
|
Swithes
|
●5 files using built-in heating circuit switch, the switch has a sensor short / open circuit /
over-voltage protection, and delay opening feature.
|
Double-coated
adhesive tape
|
●The advanced special glue equipment is used.These are 10mm of two edges of the
backing uncoated adhesive,so that the backing is easily ripped open and installation
time is reduced.
|